IPLM SERIES - POLARIS CONNECTORS - BLACK

Mounting Holes/Wire Entry From One Side

IPLM Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Wire entry ports on one side only. The mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45°C. Dual rated for use with copper and/or aluminum cables. Rated 600 V, 90°C. Mounting holes will accept a 1/4" bolt. Not recommended for fine-stranded, flexible wire. To receive the material in bags, add "-B" to the part number.

CATALOG NO.	UPC CODE	NO. OF PORTS	WIRE RANGE (mcm)	LENGTH (in)	HEIGHT (in)	WIDTH (in)	HEX SIZE	CARTON QTY.
IPLM 4-3	93001	3	4-14	3.54	2.25	1.12	Slotted	6
IPLM 4-4	93002	4	4-14	3.97	2.25	1.12	Slotted	6
IPLM 4-5	93003	5	4-14	4.39	2.25	1.12	Slotted	4
IPLM 4-6	93004	6	4-14	4.82	2.25	1.12	Slotted	4
IPLM 4-7	93005	7	4-14	5.32	2.25	1.12	Slotted	4
IPLM 4-8	93006	8	4-14	5.65	2.25	1.12	Slotted	4
IPLM 4-9	93007	9	4-14	6.07	2.25	1.12	Slotted	3
IPLM 4-10	93008	10	4-14	6.50	2.25	1.12	Slotted	3
IPLM 4-11	93009	11	4-14	6.92	2.25	1.12	Slotted	3
IPLM 4-12	93010	12	4-14	7.10	2.25	1.12	Slotted	2
IPLM 4-13	93011	13	4-14	7.76	2.25	1.12	Slotted	2
IPLM 4-14	93012	14	4-14	8.18	2.25	1.12	Slotted	2
IPLM 1/0-3	93101	3	1/0-14	4.27	2.50	1.62	3/16	6
IPLM 1/0-4	93102	4	1/0-14	4.92	2.50	1.62	3/16	6
IPLM 1/0-5	93103	5	1/0-14	5.57	2.50	1.62	3/16	4
IPLM 1/0-6	93104	6	1/0-14	6.22	2.50	1.62	3/16	4
IPLM 1/0-7	93105	7	1/0-14	6.87	2.50	1.62	3/16	4
IPLM 1/0-8	93106	8	1/0-14	7.52	2.50	1.62	3/16	4
IPLM 1/0-9	93107	9	1/0-14	8.17	2.50	1.62	3/16	3
IPLM 1/0-10	93108	10	1/0-14	8.82	2.50	1.62	3/16	3
IPLM 1/0-11	93109	11	1/0-14	9.47	2.50	1.62	3/16	3
IPLM 1/0-12	93110	12	1/0-14	10.12	2.50	1.62	3/16	2
IPLM 1/0-13	93111	13	1/0-14	10.77	2.50	1.62	3/16	2
IPLM 1/0-14	93112	14	1/0-14	11.42	2.50	1.62	3/16	2